T822 Composite board, explosion-proof film series
T822 series
T822 series is a three-component high-performance product developed for PC+PMMA and other composite sheets, PET explosion-proof film plating materials, etc. Chemical properties and excellent tensile properties.
Applicable printing range: PC+PMMA composite board and composite electroplating materials, PET explosion-proof film materials, etc.
technical parameter:
| Ink printing operation process | Add T822-900/1-1=10% curing agent, AD150=3% adhesive and dilute it with 140S/350 mesh screen printing; the first few degrees are cured at 70℃×10-20min, and the last degree is 70 It can be cured at ℃×60-90min. | ||||
| Test items | testing method | test instrument
(tool) |
Judgment criteria | Test Results | |
| Surface Tension | Dyne pen usage specification | Full Spec Dyne Pen | Bright/Flat | 28-30 | |
| Mold release black | ≥44 | ||||
| resistant to boiling | Immerse in 100°C deionized water for 2Hr | Water bath | ①No foaming; ②No wrinkle; ③100% 100% test |
5B | |
| High and low temperature moist heat cycle | 80℃//95%RH(8Hr)//-20℃(2Hr) for 10 cycles | High and low temperature humid heat cycle test box | ①No foaming; ②No wrinkle; ③100% 100% test |
5B | |
| hardness | Mitsubishi pencil at an angle of 45 / force 500 grams / / measure different places 3 times | Hardness Tester Mitsubishi Pencil | ≥1H | 1H | |
| adhesion | Draw 100 grids/3M tape for 5 times | 100 grid knife//3M tape | 100% 100% test | 5B | |
| surface resistance | Measure its surface resistance at 5 places (≤80%RH) | Surface Resistance Tester (FLUKE1508) | ≥10 10 ohms | ≥11GΩ | |
| Acid resistant | Immerse in 25℃//5% dilute H2SO4 solution for 2Hr | Thermostatic Water Bath //Glassware | ①No foaming; ②No wrinkle; ③100% 100% test |
OK | |
| Alcohol resistant | The test machine is loaded with 200 grams of force, and the cotton flannel cloth is dipped in more than 99% alcohol and rubbed back and forth for 50 times. | Low Belt Friction Machine // Cotton Flannel // Alcohol
|
①No fading ②No fading | OK | |
Operation instructions:
① Please stir fully before use to avoid separation of additives, but it does not affect the effect and performance of the product.
②The recommended baking temperature is 70℃, the time is 10-20min, and the final curing time is 70℃×60-90min. For other conditions, please confirm whether it is feasible first, so as not to affect the quality of the finished product.
③Please choose the matching thinner of our company according to the printing requirements. The selection and dosage of the diluent depends entirely on the number of printing meshes, environmental conditions and printing effects.
Note:
①Before printing, please make a trial printing to prevent the quality from not meeting the required requirements due to differences in the types of substrates.
② Before printing, it is necessary to first consider removing the oil stains and dust on the surface of the printing material.
③The oil added with curing agent must be disposed of, and cannot be included in the ink without curing agent.
Storage conditions: ① Before and after use, the ink container should be completely sealed and stored in a cool and ventilated place to avoid contact with open flame or high temperature.
Packaging specifications: ①1kg white/black plastic can, 5kg white/black plastic can, 20kg white plastic can
Shelf life: This series of products has a shelf life of 1 year from the date of production. Please reconfirm the availability when it exceeds the expiration date.
Important note: The data provided in this information is based on the test results under the company’s test conditions for reference only and is not listed as a guaranteed value. The data provided in this material is not legally responsible for any particular purpose.
Copyright @ 2026 Guangdong Qihe Cai Ink Co., Ltd ICP Record Number：粤ICP备2022064656号
Scan the code to follow us
（Long press to recognize QR code）