T822-IMD in-mold injection series

T822-IMD series is a two-component high-performance product developed for high temperature resistance of PET material in-mold injection. It is a flat, slow-drying, low-odor solvent-based ink, which can provide excellent adhesion, good chemical resistance and excellent chemical resistance. Tensile resistance, temperature resistance, etc. Suitable printing range: PET materials, etc.

Retail price

0.0

元

Market price

0.0

元

Number of views:

1000

Product serial number

T822-IMD

Category

T822-IMD in-mold injection series

Quantity

Stock:



产品询价

Description

T822-IMD in-mold injection series

Suitable printing range: PET materials, etc.

technical parameter:

Ink printing operation process		Add T822-900N=13% curing agent and dilute it with CS2500#, then screen printing with 350-200 mesh; touch dry at 70-80℃×3min for the first few degrees, and then press 80℃-90min×60- 90min can be cured.
Test items	testing method		Test instruments (tools)	Judgment criteria	Test Results
resistant to boiling	Immerse in 100°C deionized water for 2Hr		Water bath	①No foaming; ②No wrinkle; ③100% 100% test	5B
High and low temperature moist heat cycle	80℃//95%RH(8Hr)//-20℃(2Hr) for 10 cycles		High and low temperature humid heat cycle test box	①No foaming; ②No wrinkle; ③100% 100% test	5B
hardness	Mitsubishi pencil at an angle of 45 / force 500 grams / / measure different places 3 times		Hardness Tester Mitsubishi Pencil	≥1H	1H
adhesion	Draw 100 grids/3M tape for 5 times		100 grid knife//3M tape	100% 100% test	5B
surface resistance	Measure its surface resistance at 5 places (≤80%RH)		Surface Resistance Tester (FLUKE1508)	≥10 ¹⁰ ohms	≥11GΩ
Alcohol resistant	The test machine is loaded with 200 grams of force, and the cotton flannel cloth is dipped in more than 99% alcohol and rubbed back and forth for 30 times.		Low Belt Friction Machine // Cotton Flannel // Alcohol	①No fading ②No fading	OK

Operation instructions:
① Please stir fully before use to avoid separation of additives, but it does not affect the effect and performance of the product.
②Add T822-900N=13% curing agent and dilute it with CS2500#, then print with 350-200 mesh screen; for the first few degrees, touch dry at 70-80℃×3min, and then print at 80℃min×30min after curing Our IMD-NHJ01 can be printed with 1 layer at 200 mesh and fully cured at 80-90℃×60-90min. For other conditions, please confirm whether it is feasible first, so as not to affect the quality of the finished product.
③Please choose the matching thinner of our company according to the printing requirements. The selection and dosage of the diluent depends entirely on the number of printing meshes, environmental conditions and printing effects.

Note:
①Before printing, please make a trial printing to prevent the quality from not meeting the required requirements due to differences in the types of substrates.
② Before printing, it is necessary to first consider removing the oil stains and dust on the surface of the printing material.
③The oil added with curing agent must be disposed of, and cannot be included in the ink without curing agent.

Storage conditions: ① Before and after use, the ink container should be completely sealed and stored in a cool and ventilated place to avoid contact with open flame or high temperature.

Packaging specifications: ①1kg white/black plastic can, 5kg white/black plastic can, 20kg white plastic can

Shelf life: This series of products has a shelf life of 1 year from the date of production. Please reconfirm the availability when it exceeds the expiration date.

Important note: The data provided in this information is based on the test results under the company's test conditions for reference only and is not listed as a guaranteed value. The data provided in this material is not legally responsible for any particular purpose.