T822 elastic mold release dumb oil

T822-Elastic mold release matte oil is a three-component high-performance product developed for PC+PMMA and other composite sheets, PET explosion-proof film plating materials, etc. It is a matte medium-drying solvent-based ink, which can provide excellent adhesion, excellent Excellent scratch resistance and good chemical resistance and excellent tensile resistance, high surface tension and other characteristics. Applicable printing range: PC+PMMA composite board and composite electroplating materials, PET explosion-proof film materials, etc.

Retail price

0.0

元

Market price

0.0

元

Number of views:

1000

Product serial number

T822

Category

T822-Elastic mold release dumb oil

Quantity

Stock:



产品询价

Description

T822 elastic mold release dumb oil

Applicable printing range: PC+PMMA composite board and composite electroplating materials, PET explosion-proof film materials, etc.

technical parameter:

Ink printing operation process		Add T822-900/1-1=10% curing agent, AD150=3% adhesive and dilute it with 140S/350 mesh screen printing; the first few degrees are cured at 70℃×10-20min, and the last degree is 70 It can be cured at ℃×60-90min.
Test items	testing method		test instrument (tool)	Judgment criteria	Test Results
Surface Tension	Dyne pen usage specification		Full Spec Dyne Pen	34-40	34-40
resistant to boiling	Immerse in 100°C deionized water for 2Hr		Water bath	①No foaming; ②No wrinkle; ③100% 100% test	5B10 $
High and low temperature moist heat cycle	80℃//95%RH(8Hr)//-20℃(2Hr) for 10 cycles		High and low temperature humid heat cycle test box	①No foaming; ②No wrinkle; ③100% 100% test	5B
adhesion	Draw 100 grids/3M tape for 5 times		100 grid knife//3M tape	100% 100% test	5B
surface resistance	Measure its surface resistance at 5 places (≤80%RH)		Surface Resistance Tester (FLUKE1508)	≥10 ¹⁰ ohms	≥11GΩ
Alcohol resistant	The test machine is loaded with 200 grams of force, and the cotton flannel cloth is dipped in more than 99% alcohol and rubbed back and forth for 20 times.		Low Belt Friction Machine // Cotton Flannel // Alcohol	①No fading ②No fading	OK

Operation instructions:
① Please stir fully before use to avoid separation of additives, but it does not affect the effect and performance of the product.
②The recommended baking temperature is 70℃, the time is 10-20min, and the final curing time is 70℃×60-90min. For other conditions, please confirm whether it is feasible first, so as not to affect the quality of the finished product.
③Please choose the matching thinner of our company according to the printing requirements. The selection and dosage of the diluent depends entirely on the number of printing meshes, environmental conditions and printing effects.

Note:
①Before printing, please make a trial printing to prevent the quality from not meeting the required requirements due to differences in the types of substrates.
② Before printing, it is necessary to first consider removing the oil stains and dust on the surface of the printing material.
③The oil added with curing agent must be disposed of, and cannot be included in the ink without curing agent.

Storage conditions: ① Before and after use, the ink container should be completely sealed and stored in a cool and ventilated place to avoid contact with open flame or high temperature.

Packaging specifications: ①1kg white/black plastic can, 5kg white/black plastic can, 20kg white plastic can

Shelf life: This series of products has a shelf life of 1 year from the date of production. Please reconfirm the availability when it exceeds the expiration date.

Important note: The data provided in this information is based on the test results under the company's test conditions for reference only and is not listed as a guaranteed value. The data provided in this material is not legally responsible for any particular purpose.