T822 Flame Retardant Series

T822-flame retardant series is a three-component high-performance product developed to meet the new needs of market customers for PC+PMMA electroplating composite sheets to achieve flame retardant effect. It is a matte medium-drying solvent-based ink, which can provide excellent adhesion. And good flame retardancy and flexibility. Applicable printing range: PC+PMMA composite electroplating materials, etc.

Retail price

0.0

元

Market price

0.0

元

Number of views:

1000

Product serial number

T822

Category

T822 Flame Retardant Series

Quantity

Stock:



产品询价

Description

T822-flame retardant series

Applicable printing range: PC+PMMA composite electroplating materials, etc.

technical parameter:

Ink printing operation process		The first layer of printing T822-K02/2H added T822-900N, AD150=3% curing agent 300 mesh printing, 2-4 layers of printing flame retardant oil added T822-900N=10%, AD150=3% curing agent, for cover bottom T822-K04/4 add T822-900N=10%, AD150=3% and screen printing with 200-250 mesh; the total film thickness is about 45-50um. The first few degrees are pre-cured at 70-80℃×20min, and the last one degree is cured at 70-80℃×60-90min.
Test items	testing method		Test instruments (tools)	Judgment criteria	Test Results
Surface Tension	Dyne pen usage specification		Full Spec Dyne Pen	≥38	no control
Optical density	Specification for optical density (120S/300 mesh single-layer printing)		Densitometer	≥4.5	no control
resistant to boiling	Immerse in 100°C deionized water for 2Hr		Water bath	①No foaming; ②No wrinkle; ③100% 100% test	5B
High and low temperature moist heat cycle	80℃//95%RH(8Hr)//-20℃(2Hr) for 10 cycles		High and low temperature humid heat cycle test box	①No foaming; ②No wrinkle; ③100% 100% test	5B
hardness	Mitsubishi pencil at an angle of 45 / force 500 grams / / measure different places 3 times		Hardness Tester Mitsubishi Pencil	≥1H	1H
adhesion	Draw 100 grids/3M tape for 5 times		100 grid knife//3M tape	100% 100% test	5B
surface resistance	Measure its surface resistance at 5 places (≤80%RH)		Surface Resistance Tester (FLUKE1508)	≥10 ¹⁰ ohms	≥11GΩ
Acid resistant	Immerse in 25℃//5% dilute H2SO4 solution for 2Hr		Thermostatic Water Bath //Glassware	①No foaming; ②No wrinkle; ③100% 100% test	OK
Alcohol resistant	The test machine is loaded with 200 grams of force, and the cotton flannel cloth is dipped in more than 99% alcohol and rubbed back and forth for 20 times.		Low Belt Friction Machine // Cotton Flannel // Alcohol	①No fading ②No fading	OK
flame retardancy	The total film thickness is 45-50um. Take the printed sheet and place it at 0.5cm above the flame and burn it with an external flame for 90s.		Needle flame tester	①No burning ②No cracking	120s

Operation instructions:
① Please fully stir before use to avoid the separation of additives, and it will not affect the effect and performance of the product.
②The recommended baking temperature is 70-80℃, the time is 20min, and the final curing time is 70-80℃×60-90min. For other conditions, please confirm whether it is feasible first, so as not to affect the quality of the finished product.
③Please choose our company's fast, medium and slow thinners according to your printing needs. The selection and dosage of the diluent depends entirely on the number of printing meshes, environmental conditions and printing effects.

Note:
①Before printing, please make a trial printing to prevent the quality from not meeting the required requirements due to differences in the types of substrates.
② Before printing, it is necessary to first consider removing the oil stains and dust on the surface of the printing material.
③The oil added with curing agent must be disposed of, and cannot be included in the ink without curing agent.

Storage conditions: ① Before and after use, the ink container should be completely sealed and stored in a cool and ventilated place to avoid contact with open flame or high temperature.

Packaging specifications: ①1kg white/black plastic can, 5kg white/black plastic can, 20kg white plastic can

Shelf life: ① This series of products has a shelf life of 1 year from the date of production. Please re-confirm the availability when the expiration date is exceeded.

Important note: The data provided in this information is based on the test results under the company's test conditions for reference only and is not listed as a guaranteed value. The data provided in this material is not legally responsible for any particular purpose.