T825 PP series

T825 series is a high-performance product developed for special untreated polypropylene or slightly surface-treated polyethylene materials. It is a single-liquid evaporation drying, high gloss, excellent adhesion, excellent alcohol resistance, and excellent scratch resistance. The characteristic ink of injury. Suitable for printing: It can be routinely used for polyolefin series materials such as treated and untreated PP, OPP, BOPP, PP synthetic paper, PP foam board, KT board, YUPO paper and treated PE, etc. PET and other materials.

Retail price

0.0

元

Market price

0.0

元

Number of views:

1000

Product serial number

T825

Category

T825-PP series

Quantity

Stock:



产品询价

Description

T825 series

Suitable for printing: It can be routinely used for polyolefin series materials such as treated and untreated PP, OPP, BOPP, PP synthetic paper, PP foam board, KT board, YUPO paper and treated PE, etc. PET and other materials.

technical parameter:

Ink printing operation process		Add L12 thinner to dilute and then print with 120S/300 mesh screen; it can be cured at 60-80℃×10min.
Test items	testing method		Test instruments (tools)	Judgment criteria	Test Results
resistant to boiling	Immerse in 100°C deionized water for 2Hr		Water bath	①No foaming; ②No wrinkle; ③100% 100% test	5B10
High and low temperature moist heat cycle	80℃//95%RH(8Hr)//-20℃(2Hr) for 10 cycles		High and low temperature humid heat cycle test box	①No bubbles; ②No wrinkles; ③100% 100% test	5B
hardness	Mitsubishi pencil at an angle of 45 / force 500 grams / / measure different places 3 times		Hardness Tester Mitsubishi Pencil	≥1H	1H
adhesion	Draw 100 grids/3M tape for 5 times		100 grid knife//3M tape	100% 100% test	5B
Acid resistant	Immerse in 25℃//5% dilute H2SO4 solution for 2Hr		Thermostatic Water Bath //Glassware	①No foaming; ②No wrinkle; ③100% 100% test	OK
Alcohol resistant	The test machine is loaded with 500 grams of force, and the cotton flannel is dipped in more than 99% alcohol and rubbed back and forth 100 times		Low Belt Friction Machine // Cotton Flannel // Alcohol	①No fading ②No fading	OK
Abrasion resistance	500g/5 cm² load with sand rubber × 30 times back and forth		Friction Tester	①No fading ②No fading	OK

Operation instructions: ① Please fully stir before use to avoid separation of additives, and will not affect the effect and performance of the product.

②The recommended baking temperature is 60-80℃ and the time is 10min. For other conditions, please confirm whether it is feasible first, so as not to affect the quality of the finished product.

③Please choose our company's fast, medium and slow thinners according to your printing needs. The selection and dosage of the diluent depends entirely on the number of printing meshes, environmental conditions and printing effects.

Note: ①Before printing, please make a trial printing to prevent the quality from not meeting the required requirements due to differences in the types of substrates.

② Before printing, it is necessary to first consider removing the oil stains and dust on the surface of the printing material.

Storage conditions: ① Before and after use, the ink container should be completely sealed and stored in a cool and ventilated place to avoid contact with open flame or high temperature.

Packaging specifications: ①1kg white/black plastic can, 5kg white/black plastic can, 20kg white plastic can

Shelf life: ①The shelf life of this series of products is 2 years from the date of production. Please reconfirm the availability when the expiration date is exceeded.

Important note: The data provided in this information is based on the test results under the company's test conditions for reference only and is not listed as a guaranteed value. The data provided in this material is not legally responsible for any particular purpose.