T859 series is a product specially developed for printing on the surface of materials that are inconvenient to heat and difficult to adhere to. It can show excellent adhesion to various coatings whether it is water-based, oil-based, powder or UV product surface. , and it is also resistant to alcohol. Applicable printing range: all kinds of two-component PU paints that need surface printing, various amino baking paints, some electroplating layers, UV paints and other hard coatings.
T859 series is a product specially developed for printing on the surface of materials that are inconvenient to heat and difficult to adhere to. It can show excellent adhesion to various coatings whether it is water-based, oil-based, powder or UV product surface. , and it is also resistant to alcohol.
Applicable printing range: all kinds of two-component PU paint surfaces that need surface printing, various amino baking paint surfaces, some electroplating layers, UV paint surfaces and other hard coatings.
Ink printing operation process
Add L12 thinner to dilute and then use 120S/300 mesh screen printing ; it can be cured at 60-80 ℃ × 10min . If there is a special coating, you need to add T850-GW1000=10% and cure at 60-80 ℃ × 60min .
resistant to boiling
Immerse in 100°C deionized water for 2Hr
③Bag test 100%
High and low temperature moist heat cycle
80℃//95%RH(8Hr)//-20℃(2Hr) for 10 cycles
High and low temperature humid heat cycle test box
③Bag test 100%
Draw 100 grids/3M tape for 5 times
100 grid knife//3M tape
100% 100% test
Immerse in 25℃//5% dilute H2SO4 solution for 2Hr
Thermostatic Water Bath //Glassware
③Bag test 100%
The test machine is loaded with 500 grams of force, and the cotton flannel is dipped in more than 99% alcohol and rubbed back and forth 100 times
Low Belt Friction Machine //
cotton flannel // alcohol
①Do not fade
②Do not lose shine
① Please fully stir before use to avoid the separation of additives, and it will not affect the effect and performance of the product. ②The recommended baking temperature is 60-80℃ and the time is 10min. For other conditions, please confirm whether it is feasible first, so as not to affect the quality of the finished product. ③Please choose our company's fast, medium and slow thinners according to your printing needs. The selection and dosage of the diluent depends entirely on the number of printing meshes, environmental conditions and printing effects.
①Before printing, please make a trial printing to prevent the quality from not meeting the required requirements due to differences in the types of substrates. ② Before printing, it is necessary to first consider removing the oil stains and dust on the surface of the printing material.
Storage conditions: ① Before and after use, the ink container should be completely sealed and stored in a cool and ventilated place to avoid contact with open flame or high temperature.
Packaging specifications: ①1kg white/black plastic can, 5kg white/black plastic can, 20kg white plastic can
Shelf life: ①The shelf life of this series of products is 2 years from the date of production. Please reconfirm the availability when the expiration date is exceeded.
Important note: The data provided in this information is based on the test results under the company's test conditions for reference only and is not listed as a guaranteed value. The data provided in this material is not legally responsible for any particular purpose.
T859 Coating Series
We could not find any corresponding parameters, please add them to the properties table