T850 Lens 3D Pad Printing Series

T850-Lens 3D pad printing series is a pad printing ink specially developed for special-shaped materials that are inconvenient for silk screen printing. In addition to good pad printing performance, this series of inks also have very high viscosity stability and exceptional use time. The cured film layer has good adhesion, various physical and chemical resistance. Scope of application: conventionally used for physical toughened glass and chemical toughened glass. Performance characteristics: Its significant advantages are shown in excellent pad printing performance; at the same time, it adopts environmentally friendly solvents, reduces irritating odor, and reduces the frequency of oil cup replacement.

Retail price

0.0

元

Market price

0.0

元

Number of views:

1000

Product serial number

T850

Category

T850-Lens 3D pad printing series

Quantity

Stock:



产品询价

Description

T850-Lens 3D pad printing series

Scope of application: conventionally used for physical toughened glass and chemical toughened glass.

Performance characteristics: Its significant advantages are shown in excellent pad printing performance; at the same time, it adopts environmentally friendly solvents, reduces irritating odor, and reduces the frequency of oil cup replacement.

technical parameter:

Ink printing operation process		Add 10% T850-MG900 curing agent and dilute it with 350-420 mesh screen printing; first degree 160℃×10min//2nd degree 160℃×20min drying
Test items	testing method		test instrument (tool)	Judgment criteria	Test Results
Surface Tension	Dyne pen usage specification		Full Spec Dyne Pen	Different products have different dyne	30-32
size change	Standard process of two-dimensional measuring instrument (165S/420 mesh printing)		Two-dimensional measuring instrument	≤4 wires (40 microns)	2.6 wire (26 microns)
ultrasonic cleaning	Conventional washing solution //65℃//2Hr		Ultrasonic Oscillator//Basket Knife//3M Adhesive Paper	①No bubbles; ②No wrinkles; ③No discoloration ④100 % 100% test	5B
resistant to boiling	Immerse in 100°C deionized water for 2Hr		Water bath	①No bubbles; ②No wrinkles; ③No discoloration ④100 % 100% test	5B
High and low temperature moist heat cycle	80℃//95%RH(8Hr)//-20℃(2Hr) for 10 cycles		High and low temperature humid heat cycle test box	①No bubbles; ②No wrinkles; ③No discoloration ④100 % 100% test	OK
hardness	Mitsubishi pencil at an angle of 45 / force 500 grams / / measure different places 3 times		Hardness Tester Mitsubishi Pencil	≥3H	3H
adhesion	Draw 100 grids/3M tape for 5 times		100 grid knife//3M tape	100% 100% test	100%
surface resistance	Measure its surface resistance at 5 places (≤80%RH)		Surface Resistance Tester (FLUKE1508)	≥10 ¹⁰ ohms	≥11G ohm
Acid resistant	Immerse in 25℃//5% dilute H2SO4 solution for 2Hr		Thermostatic Water Bath //Glassware	①No bubbles; ②No wrinkles; ③No discoloration ④100 % 100% test	OK
Alkali resistant	Immerse in 25℃//5% NaOH solution for 2Hr		Thermostatic Water Bath // Stainless Steel Appliances	①No bubbles; ②No wrinkles; ③No discoloration ④100 % 100% test	OK
Alcohol resistant	The test machine is loaded with 200 grams of force, and the cotton flannel cloth is dipped in more than 99% alcohol and rubbed back and forth for 100 times		Low Belt Friction Machine // Cotton Flannel // Alcohol	①Do not fade ②Do not lose shine	OK
Solvent resistance (acetone)	The test machine is loaded with 200 grams of force, and the cotton flannel is dipped in chemically pure acetone and rubbed back and forth for 50 times.		Low Belt Friction Machine // Cotton Flannel // Butanone	①Do not fade ②Do not lose shine	OK

How to use:
①Before use, please add matching T850-MG900 curing agent and appropriate amount of diluent according to the proportion of 10%, and stir well before printing.
②The recommended baking temperature is 160℃, and the time is 10-20min. Please confirm whether it is feasible under other conditions, so as not to affect the quality of the finished product.
③When multi-layer printing, the first layer can be cured at 160℃×5-8min, and the second layer can be cured at 160℃×20min to ensure the quality.
④The selection and dosage of thinner depends entirely on the printing mesh number, environmental conditions and printing effect to adjust.

Storage conditions: ① Before and after use, the ink container should be completely sealed and stored in a cool and ventilated place to avoid contact with open flame or high temperature.

Packaging specifications: ①1kg white/black plastic can, 5kg white/black plastic can, 20kg white plastic can

Shelf life: ① This series of products has a shelf life of 1 year from the date of production. Please re-confirm the availability when the expiration date is exceeded.

Important note: The data provided in this information is based on the test results under the company's test conditions for reference only and is not listed as a guaranteed value. The data provided in this material is not legally responsible for any particular purpose.