T810 Plastic non-burning bottom series

T810 is a product specially developed for the surface decoration of plastic materials with poor solvent resistance. It has the advantages of non-corrosive substrate, high brightness, high temperature resistance, strong weather resistance, and can be cleaned and reprinted, especially in humid environments. Operation. Scope of application: generally used for thermal PS, ABS, styrofoam and AS and other plastic surface printing, spraying and other processing, also can be used for plexiglass, PC, rigid PVC and other surface decoration, because of its high temperature resistance, it can be used for vacuum suction plastic, high temperature molding.

Retail price

0.0

元

Market price

0.0

元

Number of views:

1000

Product serial number

T810

Category

T810 Plastic non-burning bottom series

Quantity

Stock:



产品询价

Description

T810 series

Scope of application: generally used for thermal PS, ABS, styrofoam and AS and other plastic surface printing, spraying and other processing, also can be used for plexiglass, PC, rigid PVC and other surface decoration, because of its high temperature resistance, it can be used for vacuum suction plastic, high temperature molding.

technical parameter:

Ink printing operation process		Screen printing with 120S/300 mesh; curing at 60-70℃×10min.
Test items	testing method		Test instruments (tools)	Judgment criteria	Test Results
resistant to boiling	Immerse in 100°C deionized water for 2Hr		Water bath	①No bubbles; ②No wrinkles; ③No discoloration ④100% 100% test	5B
High and low temperature moist heat cycle	80℃//95%RH(8Hr)//-20℃(2Hr) for 10 cycles		High and low temperature humid heat cycle test box	①No bubbles; ②No wrinkles; ③No discoloration ④100 % 100% test	5B
hardness	Mitsubishi pencil at an angle of 45 / force 500 grams / / measure different places 3 times		Hardness Tester Mitsubishi Pencil	≥1H	1H
adhesion	Draw 100 grids/3M tape for 5 times		100 grid knife//3M tape	100% 100% test	5B
Acid resistant	Immerse in 25℃//5% dilute H2SO4 solution for 2Hr		Thermostatic Water Bath //Glassware	①No bubbles; ②No wrinkles; ③No discoloration ④100 % 100% test	OK

Operation instructions:
① Please fully stir before use to avoid the separation of additives, and it will not affect the effect and performance of the product.

②The recommended baking temperature is 60-70℃ and the time is 10min. For other conditions, please confirm whether it is feasible first, so as not to affect the quality of the finished product.

③Please choose our company's fast, medium and slow thinners according to your printing needs. The selection and dosage of the diluent depends entirely on the number of printing meshes, environmental conditions and printing effects.

Note:
① In order to ensure that it does not burn to the bottom, it is recommended to use our company's L16 thinner. Before printing, be sure to do a trial printing to prevent the quality from not meeting the required requirements due to differences in the types of substrates.
② Before printing, it is necessary to first consider removing the oil stains and dust on the surface of the printing material.

Storage conditions: ① Before and after use, the ink container should be completely sealed and stored in a cool and ventilated place to avoid contact with open flame or high temperature.

Packaging specifications: ①1kg white/black plastic can, 5kg white/black plastic can, 20kg white plastic can

Shelf life: ①The shelf life of this series of products is 2 years from the date of production. Please reconfirm the availability when the expiration date is exceeded.

Important note: The data provided in this information is based on the test results under the company's test conditions for reference only and is not listed as a guaranteed value. The data provided in this material is not legally responsible for any particular purpose.